Calculators / Resistor color code

1 Ω resistor color code

A 1 Ω resistor is brown, black, gold, gold on a 4-band resistor and brown, black, black, silver, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.

4 bands, ±5%
Brown, black, gold, gold
5 bands, ±1%
Brown, black, black, silver, brown

Reading the bands

On the 4-band resistor, brown (1) and black (0) are the digits and gold is the multiplier, so 10 × 0.1 = 1 Ω; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.

A 1 Ω resistor on common supplies

Straight across the supply, with nothing else in the circuit:

SupplyCurrentPowerRating needed
3.3 V3.3 A10.9 Wmore than 2 W: use a bigger resistor or a lower current
5 V5 A25 Wmore than 2 W: use a bigger resistor or a lower current
9 V9 A81 Wmore than 2 W: use a bigger resistor or a lower current
12 V12 A144 Wmore than 2 W: use a bigger resistor or a lower current

What it is used for

Values this low sense current (a shunt: the voltage across it shows the current through it), limit inrush current, or act as a cheap fuse. Straight across a supply they pass large currents, so check the power rating.

Try it live

The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.

Resistance1 Ω
Tolerance±5%
Actual value is between950 mΩ and 1.05 Ω
Current on 5 V5 A
The circuit, running liveOpen in the playground →

The resistor sits across a 5 V supply with an ammeter, so you can see the current its value allows: I = 5 V ÷ R.

Printable resistor color code chart

Every band, the multipliers and tolerances, and the common values drawn, on one A4 page. We email you the PDF.

We only use your address for what you ticked. See our privacy policy.

Questions

What color is a 1 Ω resistor?

Brown, black, gold, gold on a 4-band resistor (±5%), and brown, black, black, silver, brown on a 5-band resistor (±1%).

How do I check a 1 Ω resistor?

Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 950 m Ω and 1.05 Ω; a ±1% part between 990 m Ω and 1.01 Ω.