Calculators

Resistor color code calculator

Read the bands from the end away from the gold or silver band: the first two bands (three on a 5-band resistor) are digits, the next is the multiplier (how many zeros), and the last is the tolerance. Yellow, violet, red, gold is 47 × 100 = 4.7 kΩ ±5%.

R = digits × 10^multiplier0 black · 1 brown · 2 red · 3 orange · 4 yellow5 green · 6 blue · 7 violet · 8 grey · 9 white
Resistance4.7 kΩ
Tolerance±5%
Actual value is between4.47 kΩ and 4.94 kΩ
Current on 5 V1.06 mA
The circuit, running liveOpen in the playground →

The resistor sits across a 5 V supply with an ammeter, so you can see the current its value allows: I = 5 V ÷ R.

Worked example

A resistor reads brown, black, orange, gold. Brown is 1 and black is 0, so the digits are 10; orange is a multiplier of 10³, so the value is 10 × 1,000 = 10 kΩ. Gold is ±5%, so it measures between 9.5 kΩ and 10.5 kΩ. On a 5 V supply it draws 0.5 mA.

Common resistor values and their 4-band colors
ValueBands 1 to 3
10 Ωbrown, black, black
100 Ωbrown, black, brown
220 Ωred, red, brown
330 Ωorange, orange, brown
470 Ωyellow, violet, brown
1 kΩbrown, black, red
2.2 kΩred, red, red
4.7 kΩyellow, violet, red
10 kΩbrown, black, orange
47 kΩyellow, violet, orange
100 kΩbrown, black, yellow
1 MΩbrown, black, green

Printable resistor color code chart

Every band, the multipliers and tolerances, and the common values drawn, on one A4 page. We email you the PDF.

We only use your address for what you ticked. See our privacy policy.

Questions

Which end do I read from?

Start at the end with the band closest to the edge. The tolerance band (gold or silver on most resistors) is on the right and often has a wider gap before it. If the first band would be black, or gold or silver, you are reading it backwards.

What is the difference between 4-band and 5-band resistors?

A 4-band resistor has two digit bands, a 5-band resistor three, for more precise values such as 4.99 kΩ. Both end with a multiplier and a tolerance band. 5-band resistors are usually 1% (brown) metal film.

What does a gold or silver multiplier mean?

Gold multiplies by 0.1 and silver by 0.01, for values below 10 Ω: green, blue, gold is 56 × 0.1 = 5.6 Ω.

Why does my resistor measure slightly off?

Tolerance: a 5% 1 kΩ resistor can read anywhere from 950 Ω to 1,050 Ω. Also take the resistor out of the circuit before measuring, or other parts in parallel change the reading.

Is it the color code or the colour code?

The same code: colour is the British spelling, used in the UK, India and much of the world, and color the American one. The bands, values and tolerances are identical.

What about a 6th band?

A 6th band is the temperature coefficient (how much the value drifts with heat). It does not change the value; ignore it to read the resistance.

More calculators

Want a whole circuit rather than one value? Describe it and the AI designs and simulates it.