Calculators

Capacitor code calculator

A capacitor code is the value in picofarads: the first two digits, then the number of zeros. 104 is 10 followed by four zeros, 100,000 pF, which is 100 nF or 0.1 µF; 103 is 10 nF and 102 is 1 nF.

C (pF) = first two digits × 10^third digit1,000 pF = 1 nF · 1,000 nF = 1 µFJ ±5% · K ±10% · M ±20%
Capacitance100 nF
In picofarads100,000 pF
In nanofarads100 nF
In microfarads0.1 µF

Worked example

A capacitor marked 473J: 47 followed by three zeros is 47,000 pF, which is 47 nF or 0.047 µF, and J means ±5%, so between 44.65 nF and 49.35 nF.

Common capacitor codes
CodeValue
1010 pF
2222 pF
4747 pF
101100 pF
221220 pF
471470 pF
1021 nF (1,000 pF)
2222.2 nF (2,200 pF)
4724.7 nF (4,700 pF)
10310 nF (10,000 pF)
22322 nF (22,000 pF)
47347 nF (47,000 pF)
104100 nF (100,000 pF)
224220 nF (220,000 pF)
474470 nF (470,000 pF)
1051 µF

Questions

What is a 104 capacitor?

100 nF (0.1 µF), the most common decoupling capacitor: one goes next to the power pins of almost every chip.

What does the letter after the number mean?

The tolerance: J is ±5%, K is ±10% and M is ±20%. A code such as 2A in front of the number is the voltage rating (2A is 100 V).

What about codes like 4R7?

R marks the decimal point in picofarads: 4R7 is 4.7 pF. Values under 10 pF are written this way.

Why is there no µF marking?

Small ceramic capacitors have no room for units, so the code is always in picofarads. Electrolytic capacitors are big enough to print the value in µF directly.

More calculators

Want a whole circuit rather than one value? Describe it and the AI designs and simulates it.