RC time constant calculator
The RC time constant is the resistance times the capacitance: τ = R × C. The capacitor reaches 63% of the supply after one τ and is effectively full (99%) after 5τ.
τ = R × CV(t) = Vs × (1 − e^(−t/τ))fc = 1 ÷ (2π × R × C)| Time constant τ | 10 ms |
|---|---|
| Voltage after one τ (63%) | 3.16 V |
| Time to half the supply | 6.93 ms |
| Time to full (5τ, 99%) | 50 ms |
| Cutoff frequency as a filter | 15.9 Hz |
Worked example
10 kΩ and 1 µF: τ = 10000 × 0.000001 = 10 ms. On 5 V the capacitor reaches 3.16 V after 10 ms, half the supply after 6.9 ms, and is full after 50 ms. As a filter, the cutoff is 15.9 Hz.
Questions
Why 63%?
After one time constant the capacitor has covered 1 − 1/e of the way to the supply, which is 63.2%. Each further τ covers 63% of what is left.
How long until the capacitor is full?
In theory never, in practice 5τ: by then it is within 1% of the supply.
What is the cutoff frequency for?
Used as a low-pass filter, the same R and C pass frequencies below fc and weaken those above it; at fc the output is about 71% (−3 dB) of the input.
More calculators
- Resistor color code calculator
- LED resistor calculator
- Voltage divider calculator
- Ohm's law calculator
- Series and parallel resistor calculator
- Transistor base resistor calculator
- 555 timer calculator (astable)
- PCB trace width calculator
- Battery life calculator
- RC filter calculator (low-pass)
- Capacitor code calculator
Want a whole circuit rather than one value? Describe it and the AI designs and simulates it.