Series and parallel resistor calculator
In series, resistances add: R = R1 + R2 + R3. In parallel, the reciprocals add: 1/R = 1/R1 + 1/R2 + 1/R3, so the total is always smaller than the smallest resistor. For two resistors in parallel, R = (R1 × R2) ÷ (R1 + R2).
Series: R = R1 + R2 + …Parallel: 1/R = 1/R1 + 1/R2 + …Two in parallel: R = R1·R2 ÷ (R1 + R2)| Total resistance (parallel) | 688 Ω |
|---|---|
| The same resistors in series | 3.2 kΩ |
| Total current | 13.1 mA |
| R1 (1 kΩ) | 9 V, 9 mA |
| R2 (2.2 kΩ) | 9 V, 4.09 mA |
Worked example
A 1 kΩ and a 2.2 kΩ resistor. In series they make 3.2 kΩ, and on 9 V draw 2.81 mA, dropping 2.81 V and 6.19 V. In parallel they make (1,000 × 2,200) ÷ 3,200 = 688 Ω; each sees the full 9 V, so 9 mA flows through the 1 kΩ and 4.09 mA through the 2.2 kΩ, 13.1 mA in all.
Questions
Why is a parallel total smaller than every resistor?
Each resistor in parallel is another path for current, so together they let more current through than any one of them alone: lower resistance.
How do I make a value I do not have?
Two equal resistors in series double the value, in parallel they halve it. Two 1 kΩ in parallel make 500 Ω; a 10 kΩ and a 2.2 kΩ in series make 12.2 kΩ.
How is the voltage shared in series?
In proportion to each resistance: the current is the same through every resistor, so the biggest resistor drops the most voltage. That is how a voltage divider works.
Do the power ratings add too?
Spread the power: equal resistors share it equally, but unequal ones do not. Check each resistor: P = I² × R in series, P = V² ÷ R in parallel.
More calculators
- Resistor color code calculator
- LED resistor calculator
- Voltage divider calculator
- RC time constant calculator
- Ohm's law calculator
- Transistor base resistor calculator
- 555 timer calculator (astable)
- PCB trace width calculator
- Battery life calculator
- RC filter calculator (low-pass)
- Capacitor code calculator
Want a whole circuit rather than one value? Describe it and the AI designs and simulates it.