Calculators

Voltage divider calculator

A voltage divider's output is the input voltage times R2 divided by the sum of both resistors: Vout = Vin × R2 ÷ (R1 + R2), where R2 is the resistor to ground.

Vout = Vin × R2 ÷ (R1 + R2)I = Vin ÷ (R1 + R2)
Output voltage3.84 V
Current through the divider816 µA
Power in R16.66 mW
Power in R23.13 mW
The circuit, running liveOpen in the playground →

The voltmeter has no load, like a real meter. A load on the output draws current and pulls Vout down; keep the load's resistance at least ten times R2.

Worked example

12 V across R1 = 10 kΩ (top) and R2 = 4.7 kΩ (bottom): Vout = 12 × 4700 ÷ 14700 = 3.84 V, with 0.816 mA flowing through both.

Questions

Which resistor is R2?

R2 is the one between the output and ground (the bottom resistor). R1 goes between the input and the output.

Can I power something from a voltage divider?

Only very light loads such as a microcontroller input. Anything that draws real current changes the output; use a voltage regulator instead.

How do I pick the resistor sizes?

Choose the ratio for the voltage, then the size for the current: 10 kΩ-range values waste little power and are stiff enough for most sensor and ADC inputs.

More calculators

Want a whole circuit rather than one value? Describe it and the AI designs and simulates it.