Calculators / Resistor color code

1 MΩ resistor color code

A 1 MΩ resistor is brown, black, green, gold on a 4-band resistor and brown, black, black, yellow, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.

4 bands, ±5%
Brown, black, green, gold
5 bands, ±1%
Brown, black, black, yellow, brown

Reading the bands

On the 4-band resistor, brown (1) and black (0) are the digits and green is the multiplier, so 10 × 100,000 = 1 MΩ; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.

A 1 MΩ resistor on common supplies

Straight across the supply, with nothing else in the circuit:

SupplyCurrentPowerRating needed
3.3 V3.3 µA10.9 µW1/8 W
5 V5 µA25 µW1/8 W
9 V9 µA81 µW1/8 W
12 V12 µA144 µW1/8 W

What it is used for

Used where very little current should flow: battery-voltage dividers into an ADC, op-amp feedback and input resistors, and long RC time constants.

Try it live

The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.

Resistance1 MΩ
Tolerance±5%
Actual value is between950 kΩ and 1.05 MΩ
Current on 5 V5 µA
The circuit, running liveOpen in the playground →

The resistor sits across a 5 V supply with an ammeter, so you can see the current its value allows: I = 5 V ÷ R.

Printable resistor color code chart

Every band, the multipliers and tolerances, and the common values drawn, on one A4 page. We email you the PDF.

We only use your address for what you ticked. See our privacy policy.

Questions

What color is a 1 MΩ resistor?

Brown, black, green, gold on a 4-band resistor (±5%), and brown, black, black, yellow, brown on a 5-band resistor (±1%).

How do I check a 1 MΩ resistor?

Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 950 kΩ and 1.05 MΩ; a ±1% part between 990 kΩ and 1.01 MΩ.