Calculators / Resistor color code
12 Ω resistor color code
A 12 Ω resistor is brown, red, black, gold on a 4-band resistor and brown, red, black, gold, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.
Reading the bands
On the 4-band resistor, brown (1) and red (2) are the digits and black is the multiplier, so 12 × 1 = 12 Ω; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.
A 12 Ω resistor on common supplies
Straight across the supply, with nothing else in the circuit:
| Supply | Current | Power | Rating needed |
|---|---|---|---|
| 3.3 V | 275 mA | 908 mW | 2 W |
| 5 V | 417 mA | 2.08 W | more than 2 W: use a bigger resistor or a lower current |
| 9 V | 750 mA | 6.75 W | more than 2 W: use a bigger resistor or a lower current |
| 12 V | 1 A | 12 W | more than 2 W: use a bigger resistor or a lower current |
What it is used for
Common as MOSFET gate resistors (10 to 100 Ω), series resistors that damp ringing on fast signal lines, and LED resistors on 3.3 V or for high-current LEDs.
Try it live
The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.
| Resistance | 12 Ω |
|---|---|
| Tolerance | ±5% |
| Actual value is between | 11.4 Ω and 12.6 Ω |
| Current on 5 V | 417 mA |
Printable resistor color code chart
Questions
What color is a 12 Ω resistor?
Brown, red, black, gold on a 4-band resistor (±5%), and brown, red, black, gold, brown on a 5-band resistor (±1%).
How do I check a 12 Ω resistor?
Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 11.4 Ω and 12.6 Ω; a ±1% part between 11.9 Ω and 12.1 Ω.
What can I use instead of a 12 Ω resistor?
The nearest standard values are 10 Ω and 15 Ω; for LED resistors and pull-ups either usually works. For something in between, put two resistors in series (the values add) or in parallel; the series and parallel calculator works out the total.