Calculators / Resistor color code
3.3 kΩ resistor color code
A 3.3 kΩ resistor is orange, orange, red, gold on a 4-band resistor and orange, orange, black, brown, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.
Reading the bands
On the 4-band resistor, orange (3) and orange (3) are the digits and red is the multiplier, so 33 × 100 = 3.3 kΩ; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.
A 3.3 kΩ resistor on common supplies
Straight across the supply, with nothing else in the circuit:
| Supply | Current | Power | Rating needed |
|---|---|---|---|
| 3.3 V | 1 mA | 3.3 mW | 1/8 W |
| 5 V | 1.52 mA | 7.58 mW | 1/8 W |
| 9 V | 2.73 mA | 24.5 mW | 1/8 W |
| 12 V | 3.64 mA | 43.6 mW | 1/8 W |
What it is used for
Everyday values for transistor base resistors, LED resistors on 9 V and 12 V, voltage dividers, and pull-ups (4.7 kΩ is the usual I²C pull-up).
Try it live
The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.
| Resistance | 3.3 kΩ |
|---|---|
| Tolerance | ±5% |
| Actual value is between | 3.14 kΩ and 3.47 kΩ |
| Current on 5 V | 1.52 mA |
Printable resistor color code chart
Questions
What color is a 3.3 kΩ resistor?
Orange, orange, red, gold on a 4-band resistor (±5%), and orange, orange, black, brown, brown on a 5-band resistor (±1%).
How do I check a 3.3 kΩ resistor?
Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 3.14 kΩ and 3.47 kΩ; a ±1% part between 3.27 kΩ and 3.33 kΩ.
What can I use instead of a 3.3 kΩ resistor?
The nearest standard values are 2.7 kΩ and 3.9 kΩ; for LED resistors and pull-ups either usually works. For something in between, put two resistors in series (the values add) or in parallel; the series and parallel calculator works out the total.