Calculators / Resistor color code
3.3 Ω resistor color code
A 3.3 Ω resistor is orange, orange, gold, gold on a 4-band resistor and orange, orange, black, silver, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.
Reading the bands
On the 4-band resistor, orange (3) and orange (3) are the digits and gold is the multiplier, so 33 × 0.1 = 3.3 Ω; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.
A 3.3 Ω resistor on common supplies
Straight across the supply, with nothing else in the circuit:
| Supply | Current | Power | Rating needed |
|---|---|---|---|
| 3.3 V | 1 A | 3.3 W | more than 2 W: use a bigger resistor or a lower current |
| 5 V | 1.52 A | 7.58 W | more than 2 W: use a bigger resistor or a lower current |
| 9 V | 2.73 A | 24.5 W | more than 2 W: use a bigger resistor or a lower current |
| 12 V | 3.64 A | 43.6 W | more than 2 W: use a bigger resistor or a lower current |
What it is used for
Values this low sense current (a shunt: the voltage across it shows the current through it), limit inrush current, or act as a cheap fuse. Straight across a supply they pass large currents, so check the power rating.
Try it live
The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.
| Resistance | 3.3 Ω |
|---|---|
| Tolerance | ±5% |
| Actual value is between | 3.14 Ω and 3.47 Ω |
| Current on 5 V | 1.52 A |
Printable resistor color code chart
Questions
What color is a 3.3 Ω resistor?
Orange, orange, gold, gold on a 4-band resistor (±5%), and orange, orange, black, silver, brown on a 5-band resistor (±1%).
How do I check a 3.3 Ω resistor?
Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 3.13 Ω and 3.46 Ω; a ±1% part between 3.27 Ω and 3.33 Ω.
What can I use instead of a 3.3 Ω resistor?
The nearest standard values are 2.7 Ω and 3.9 Ω; for LED resistors and pull-ups either usually works. For something in between, put two resistors in series (the values add) or in parallel; the series and parallel calculator works out the total.