Calculators / Resistor color code
6.8 kΩ resistor color code
A 6.8 kΩ resistor is blue, grey, red, gold on a 4-band resistor and blue, grey, black, brown, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.
Reading the bands
On the 4-band resistor, blue (6) and grey (8) are the digits and red is the multiplier, so 68 × 100 = 6.8 kΩ; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.
A 6.8 kΩ resistor on common supplies
Straight across the supply, with nothing else in the circuit:
| Supply | Current | Power | Rating needed |
|---|---|---|---|
| 3.3 V | 485 µA | 1.6 mW | 1/8 W |
| 5 V | 735 µA | 3.68 mW | 1/8 W |
| 9 V | 1.32 mA | 11.9 mW | 1/8 W |
| 12 V | 1.76 mA | 21.2 mW | 1/8 W |
What it is used for
Everyday values for transistor base resistors, LED resistors on 9 V and 12 V, voltage dividers, and pull-ups (4.7 kΩ is the usual I²C pull-up).
Try it live
The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.
| Resistance | 6.8 kΩ |
|---|---|
| Tolerance | ±5% |
| Actual value is between | 6.46 kΩ and 7.14 kΩ |
| Current on 5 V | 735 µA |
Printable resistor color code chart
Questions
What color is a 6.8 kΩ resistor?
Blue, grey, red, gold on a 4-band resistor (±5%), and blue, grey, black, brown, brown on a 5-band resistor (±1%).
How do I check a 6.8 kΩ resistor?
Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 6.46 kΩ and 7.14 kΩ; a ±1% part between 6.73 kΩ and 6.87 kΩ.
What can I use instead of a 6.8 kΩ resistor?
The nearest standard values are 5.6 kΩ and 8.2 kΩ; for LED resistors and pull-ups either usually works. For something in between, put two resistors in series (the values add) or in parallel; the series and parallel calculator works out the total.