Calculators / Resistor color code
820 Ω resistor color code
A 820 Ω resistor is grey, red, brown, gold on a 4-band resistor and grey, red, black, black, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.
Reading the bands
On the 4-band resistor, grey (8) and red (2) are the digits and brown is the multiplier, so 82 × 10 = 820 Ω; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.
A 820 Ω resistor on common supplies
Straight across the supply, with nothing else in the circuit:
| Supply | Current | Power | Rating needed |
|---|---|---|---|
| 3.3 V | 4.02 mA | 13.3 mW | 1/8 W |
| 5 V | 6.1 mA | 30.5 mW | 1/8 W |
| 9 V | 11 mA | 98.8 mW | 1/4 W |
| 12 V | 14.6 mA | 176 mW | 1/2 W |
As an LED resistor on 5 V it lets about 3.7 mA through a red LED (about 2 V). Work out an LED resistor.
What it is used for
The usual range for LED current-limiting resistors on 5 V (220 to 470 Ω gives about 6 to 14 mA through a red LED), and for base resistors switching small loads.
Try it live
The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.
| Resistance | 820 Ω |
|---|---|
| Tolerance | ±5% |
| Actual value is between | 779 Ω and 861 Ω |
| Current on 5 V | 6.1 mA |
Printable resistor color code chart
Questions
What color is a 820 Ω resistor?
Grey, red, brown, gold on a 4-band resistor (±5%), and grey, red, black, black, brown on a 5-band resistor (±1%).
How do I check a 820 Ω resistor?
Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 779 Ω and 861 Ω; a ±1% part between 812 Ω and 828 Ω.
What can I use instead of a 820 Ω resistor?
The nearest standard values are 680 Ω and 1 kΩ; for LED resistors and pull-ups either usually works. For something in between, put two resistors in series (the values add) or in parallel; the series and parallel calculator works out the total.