Calculators / Resistor color code
1.8 kΩ resistor color code
A 1.8 kΩ resistor is brown, grey, red, gold on a 4-band resistor and brown, grey, black, brown, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.
Reading the bands
On the 4-band resistor, brown (1) and grey (8) are the digits and red is the multiplier, so 18 × 100 = 1.8 kΩ; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.
A 1.8 kΩ resistor on common supplies
Straight across the supply, with nothing else in the circuit:
| Supply | Current | Power | Rating needed |
|---|---|---|---|
| 3.3 V | 1.83 mA | 6.05 mW | 1/8 W |
| 5 V | 2.78 mA | 13.9 mW | 1/8 W |
| 9 V | 5 mA | 45 mW | 1/8 W |
| 12 V | 6.67 mA | 80 mW | 1/4 W |
As an LED resistor on 5 V it lets about 1.7 mA through a red LED (about 2 V). Work out an LED resistor.
What it is used for
Everyday values for transistor base resistors, LED resistors on 9 V and 12 V, voltage dividers, and pull-ups (4.7 kΩ is the usual I²C pull-up).
Try it live
The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.
| Resistance | 1.8 kΩ |
|---|---|
| Tolerance | ±5% |
| Actual value is between | 1.71 kΩ and 1.89 kΩ |
| Current on 5 V | 2.78 mA |
Printable resistor color code chart
Questions
What color is a 1.8 kΩ resistor?
Brown, grey, red, gold on a 4-band resistor (±5%), and brown, grey, black, brown, brown on a 5-band resistor (±1%).
How do I check a 1.8 kΩ resistor?
Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 1.71 kΩ and 1.89 kΩ; a ±1% part between 1.78 kΩ and 1.82 kΩ.
What can I use instead of a 1.8 kΩ resistor?
The nearest standard values are 1.5 kΩ and 2.2 kΩ; for LED resistors and pull-ups either usually works. For something in between, put two resistors in series (the values add) or in parallel; the series and parallel calculator works out the total.