Calculators / Resistor color code
22 kΩ resistor color code
A 22 kΩ resistor is red, red, orange, gold on a 4-band resistor and red, red, black, red, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.
Reading the bands
On the 4-band resistor, red (2) and red (2) are the digits and orange is the multiplier, so 22 × 1,000 = 22 kΩ; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.
A 22 kΩ resistor on common supplies
Straight across the supply, with nothing else in the circuit:
| Supply | Current | Power | Rating needed |
|---|---|---|---|
| 3.3 V | 150 µA | 495 µW | 1/8 W |
| 5 V | 227 µA | 1.14 mW | 1/8 W |
| 9 V | 409 µA | 3.68 mW | 1/8 W |
| 12 V | 545 µA | 6.55 mW | 1/8 W |
What it is used for
The standard range for pull-up and pull-down resistors (10 kΩ is the classic), op-amp gain resistors, and RC timing with small capacitors.
Try it live
The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.
| Resistance | 22 kΩ |
|---|---|
| Tolerance | ±5% |
| Actual value is between | 20.9 kΩ and 23.1 kΩ |
| Current on 5 V | 227 µA |
Printable resistor color code chart
Questions
What color is a 22 kΩ resistor?
Red, red, orange, gold on a 4-band resistor (±5%), and red, red, black, red, brown on a 5-band resistor (±1%).
How do I check a 22 kΩ resistor?
Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 20.9 kΩ and 23.1 kΩ; a ±1% part between 21.8 kΩ and 22.2 kΩ.
What can I use instead of a 22 kΩ resistor?
The nearest standard values are 18 kΩ and 27 kΩ; for LED resistors and pull-ups either usually works. For something in between, put two resistors in series (the values add) or in parallel; the series and parallel calculator works out the total.