Calculators / Resistor color code
18 kΩ resistor color code
A 18 kΩ resistor is brown, grey, orange, gold on a 4-band resistor and brown, grey, black, red, brown on a 5-band resistor. The colour code is the same everywhere; only the spelling differs.
Reading the bands
On the 4-band resistor, brown (1) and grey (8) are the digits and orange is the multiplier, so 18 × 1,000 = 18 kΩ; gold is ±5%. The 5-band version uses three digits and one fewer zero, and its last band, brown, is ±1%.
A 18 kΩ resistor on common supplies
Straight across the supply, with nothing else in the circuit:
| Supply | Current | Power | Rating needed |
|---|---|---|---|
| 3.3 V | 183 µA | 605 µW | 1/8 W |
| 5 V | 278 µA | 1.39 mW | 1/8 W |
| 9 V | 500 µA | 4.5 mW | 1/8 W |
| 12 V | 667 µA | 8 mW | 1/8 W |
What it is used for
The standard range for pull-up and pull-down resistors (10 kΩ is the classic), op-amp gain resistors, and RC timing with small capacitors.
Try it live
The calculator is set to this resistor. Change any band to read another value; the circuit below the answer runs it on 5 V.
| Resistance | 18 kΩ |
|---|---|
| Tolerance | ±5% |
| Actual value is between | 17.1 kΩ and 18.9 kΩ |
| Current on 5 V | 278 µA |
Printable resistor color code chart
Questions
What color is a 18 kΩ resistor?
Brown, grey, orange, gold on a 4-band resistor (±5%), and brown, grey, black, red, brown on a 5-band resistor (±1%).
How do I check a 18 kΩ resistor?
Measure it out of the circuit with a multimeter on the resistance range. A ±5% part reads between 17.1 kΩ and 18.9 kΩ; a ±1% part between 17.8 kΩ and 18.2 kΩ.
What can I use instead of a 18 kΩ resistor?
The nearest standard values are 15 kΩ and 22 kΩ; for LED resistors and pull-ups either usually works. For something in between, put two resistors in series (the values add) or in parallel; the series and parallel calculator works out the total.