Circuit simulator

Design and simulate circuits online, with AI

Open the simulator in a browser tab and build a circuit, or describe one in plain words and let AI draw it. Then flip switches, change values and read the voltages and currents while it runs.

  • Nothing to install. The simulator runs in your browser.
  • No account needed to build, run and share a circuit.
  • Readings come from the simulator, not from the AI.

What you can do in the browser

Each of these opens in a browser tab, with nothing to install.

Build and run a circuit

Start from an example: an LED and resistor, a voltage divider, an RC circuit, a transistor switch or a 555 LED flasher. Click a switch to flip it, double-click a part to change its value, and add parts from the parts panel.

Open the simulator

Describe it, and AI designs it

Write what you want in plain words. The AI returns a circuit that opens in the simulator, and you can ask it for changes in the same conversation.

Design a circuit with AI

Read voltages and currents

Hover over a part to see the voltage across it and the current through it. Add a voltmeter or an ammeter to keep a reading on the circuit.

Debug a circuit you built

Describe your breadboard, or send a photo, and say what goes wrong. The AI draws the circuit as you built it, you check the drawing, and the simulator tests the diagnosis and the fix. Needs a free account.

Debug my circuit

Work out a value first

12 calculators, such as the LED resistor, voltage divider, 555 timer and resistor color code. Each gives the answer and the formula, and where there is a circuit to show, the circuit running in the simulator.

See the calculators

Share a link

Share gives you a short link to the circuit as it is now, edits included. Anyone with the link can open it, change it and share their own version. You also get code to embed it in a web page.

How the AI designs are checked

  • Before you see a design, it passes structural checks: every part is connected, every part has a power source, and the parts you asked for by name are there. If a check fails, the AI gets one more try to fix it.
  • In the AI workspace, the design then runs in the simulator, which reports problems it finds, such as a short circuit or an LED with too much current.
  • When the simulation runs cleanly, an AI review may say whether the design matches what you asked for. The review is an opinion, not a measurement.
  • The voltages and currents come only from the simulator. Open the design and read the meters before you build it.

What needs an account

No account
  • Build, run and share circuits in the simulator.
  • The calculators.
  • The AI designer, 2 designs a day, while the free allowance shared by all visitors lasts.
Free account
  • About 5 AI designs a month, while the free allowance lasts. Maker gives about 75 and Pro about 150.
  • A list of the circuits you have shared.
  • Debug my circuit.
  • Publishing your designs on your profile.

What it does, and what it does not

In the simulator
  • DC and AC voltage sources, a current source, switches and push buttons.
  • Resistors, capacitors, inductors and potentiometers.
  • Diodes, LEDs, Zener diodes, NPN and PNP transistors, N-channel MOSFETs and op-amps.
  • The 555 timer, lamps, voltmeters and ammeters.
Not here
  • PCB layout.
  • Running Arduino or other microcontroller code.
  • A guarantee for a physical build. Simulation is an aid for learning and prototyping. For digital logic in Verilog, see the Verilog simulator.

For mains voltage, batteries, heat or anything safety critical, check the design and test it carefully before you build it.

Questions

Do I need to install anything?
No. The simulator runs in your browser tab, on a laptop, a tablet or a phone.
Do I need an account?
Not to build, run and share circuits in the simulator, or to use the calculators. Without an account you can also try the AI designer, 2 designs a day, while the free allowance shared by all visitors lasts. A free account gives you about 5 AI designs a month, keeps a list of the circuits you share, and lets you use Debug my circuit.
Can I trust the circuit the AI designs?
Check it. Every AI design passes structural checks before you see it: every part is connected, every part has a power source, and the parts you asked for by name are there. That does not prove the circuit works. The voltages and currents come only from the simulator, so open the design and read the meters.
Which simulator runs the circuits?
CircuitJS, an open-source circuit simulator (GPL), hosted on breadboardhub and running in your browser.
Can I design a printed circuit board?
No. breadboardhub has no PCB layout. It simulates circuits; it does not lay out boards. A PCB trace width calculator is one of the calculators.
Can it run Arduino code?
No. When you ask the AI for a microcontroller project, its answer can include an Arduino sketch, but the simulator does not run code. It runs the circuit.
What does it cost?
The simulator and the calculators are free. AI is metered per month: about 5 AI designs on the free plan (while the free allowance shared by free users lasts), about 75 on Maker ($8 a month) and about 150 on Pro ($16 a month).